Access Denied
IMPORTANT! If you’re a store owner, please make sure you have Customer accounts enabled in your Store Admin, as you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
Print Options for Older Printers
R2, C2, R1, Cura, Octoprint, and MatterControl
Connect to Robo Web Dashboard for R2 and C2
To connect, go to your printer's touchscreen and go to Utilities > Network > Network Status to find the printer's IP address and hostname.
If your printer is connected to Wi-Fi, you can enter the IP address or hostname into your browser's address bar to bring up the web dashboard interface. From here you can upload STL and G-code files. If you upload an STL file, you'll be prompted to slice the file with the onboard slicer to produce a .gcode file, which will save to your printer's local drive.
Note: In order to discover your printer by its hostname (rather than IP) you may need to download Bonjour on your desktop computer.
Cura for Robo
Models: R2 and C2 only
Use Cura for Robo slicing software to preview and prepare your files for printing. It comes loaded with Robo print profiles (recommended settings) but allows you to customize advanced printing options. If your printer is connected to Wi-Fi, you can connect it to Cura to load your prints directly from the program onto your printer. Or if you don't have internet connection, you can transfer the files to your printer via a USB drive.
MatterControl
Models: R1+ and R1 only
MatterControl allows you to preview and prepare your files for printing. You can customize advanced print settings and connect to your printer via USB to start a print. Or you can load the files onto your printer via SD card.
Invalid password
Enter