Your Drone Kit comes with:
- Motors (4)
- Extension Wires (4)
- Board (1)
- Gears (4)
- Propellers (4)
- Screws (12)
- Bushings (8)
- Controller (1)
- Battery (1)
- Charger (1)
Printing the files
Robo R2 and R1+ Body Styles
Stealth body
Recommended print settings
- Layer Height: 0.2 mm
- Raft: Yes
- Infill: 10%
- Supports: Everywhere
- Material: PLA
- Extruder temp: 200 °C
- Bed temp: 60 °C
Fighter body
Recommended print settings
- Layer Height: 0.2 mm
- Raft: Yes
- Infill: 10%
- Supports: Everywhere
- Material: PLA
- Extruder temp: 200 °C
- Bed temp: 60 °C
Shooter body
Recommended print settings
- Layer Height: 0.2 mm
- Raft: Yes
- Infill: 10%
- Supports: Everywhere
- Material: PLA
- Extruder temp: 200 °C
- Bed temp: 60 °C
Robo C2 Body Style
Modular Body
Recommended print settings
- Layer Height: 0.2 mm
- Raft: Yes
- Infill: 10%
- Supports: Everywhere
- Material: PLA
- Extruder temp: 200 °C
The Step-by-step guide
After you download your preferred files, follow the instructions in the step by step guide to assemble the drone.
